Return to Product List

The N-1000-II Access Control system is versatile, reliable, and expandable.
For this reason the N-1000-II is the most advanced access control product available today.
The N-1000-II offers more features included in the standard configuration than most manufacturers provide even as options.
Each N-1000-II will operate independently while off line with the computer or each other.
The panels communicate with the PC using a 20 MA loop or optional supervised RS-485.
This not only provides a great deal of access control reliability, but also frees up the computer for other tasks if needed.
The N-1000-II is compatible with Northern Computers' PCPAK and WIN-PAK software packages, as well as many time and attendance and badging programs.
Northern N-1000-II access control panels open doors millions of times each day all around the world.

Benefits

Supports Wiegand, Mag-stripe, Proximity, Barcode, Barium Ferrite, Biometric readers and/or Keypads.
Distributed database for independent operation.
Will operate in local configuration or remote site configuration, dial up or leased lines
1850 transaction buffer with recall. Expandable to 5000 transactions.
Expandable to 126 doors per loop.
Standard 3800 card memory. Expandable to over 9900 cards.
63 time zones to control card access or relays.
4 output relays, expandable to 8 on board and up to 24 using the AEP-3 relay expansion board.
All relays are time programmable for automatic control.
12 alarm inputs, may be supervised with the AEP-5 supervised input board (soon to be built in).
Accepts limited use visitors cards, valid 1 to 254 days or 1 to 254 uses.
2 card readers with separate databases and names.
Holiday schedule to over-ride 32 pre-selected days.
Supports anti-passback as standard.
The output relays will control electric door strikes, magnetic locks and deadbolts, turnstiles,
gate operators, or any other electrically operated device.

Each N-1000-II supports up to 2 of the following:
Wiegand Readers
Key Readers
Magnetic Stripe Card Readers
Proximity Card Readers
Barcode Readers
Barium Ferrite Readers
Biometric Readers (Hand geometry and others)
Keypads (5 wire and 12 wire units)
For high security applications the above readers can be
used with a reader/keypad combination.
This means the card holder needs both an access control
card and a PIN code.
The control panel offers the flexibility of controlling entry to
two doors, or a single door with anti-passback.

Specifications

Enclosure:  NEMA type 1 with knockouts, tamper switch, hinged cover lock and key
Size:  14" H x 16" W x 4" D (35.6 cm H x 40.6 cm W x 10.2 cm D)
Weight:  21 lbs (9.5 kg)
Power Requirements:  12 VAC, 40 VA, 60 Hz or 12 VDC linear
Output Power:  5V, 350 mA for standard 5 VDC readers
Backup Battery:  8 VDC (4A/hr) 750mA current draw controller only
Memory Backup:  3 VDC rechargeable lithium (ALQW), 30 day panel memory
Fuses:  3A slow blow
Operating Temperature:  35 to 110° F (2 to 43° C)
Humidity:  Up to 95% non-condensing
Distance Limit:  4000' (1219.2 m) with RS-485
Alarm In. Points:  16 normally closed, non-supervised input points
Alarm Out. Points:  4 double-pole, double throw (DPDT) relay contacts (normally open/closed), 24 VDC 1A, resistive load
N-1000-II:  2-door access control panel, 3800 users, 4 relay outputs

Return to Product List